Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulb on Subaru Forester

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part: Tail light bulb

Today we will see, in this video tutorial, how to remove and replace the rear light bulb of the Subaru Forester, following these simple and quick steps. First we open the tailgate and start unscrewing the fixing screws of the light, which we find on the sides; to do this we use a Phillips screwdriver and a socket wrench, as shown in the video. At this point we disconnect the electrical connector of the lighthouse in order to access the bulb bulbs; let's replace them with the new ones and hook them perfectly on the light, following the video tutorial to the end!

Posted on 16 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulb in the Subaru Forester?
How to replace the rear light bulb in the Subaru Forester?
Subaru Forester (2008-2011 / SH, MK 3) Replacing the rear light bulb of the Subaru Forester is a very simple operation, we obviously need a 10mm socket wrench in addition to the spare bulb…
How to replace the headlight bulb in the Subaru Forester?
How to replace the headlight bulb in the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) Replacing the headlight bulb in the Subaru Forester is a very simple and quick operation, let's see how to proceed in this tutorial. Let's make sure …
How to replace the rear light bulb on the Subaru Forester?
How to replace the rear light bulb on the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) In order to replace the rear light bulb of the Subaru Forester you need to lift the tailgate of the rear compartment so that you can have access to t…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos