Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Trip Meter on a Subaru Forester

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part: Warning light – error code

In this video tutorial, you can see how to reset the trip meter on a Subaru Forester by following a few simple steps. Get into your vehicle and first locate the button on the instrument cluster. You can reset either (TRIP A or TRIP B) by pressing and holding the button on the instrument cluster. To set it to zero, simply keep the button pressed. Each time you fill up your car with fuel, if you reset the trip meter, you can constantly monitor fuel consumption and check how many miles you can travel on a full tank.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Subaru Forester
How to Reset the Service Light on a Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) This guide explains how to reset the service light for the regular oil change maintenance of the Subaru Forester in simple and quick steps. First, ge…
When and How to Replace the Timing Belt on the Subaru Forester
When and How to Replace the Timing Belt on the Subaru Forester
Subaru Forester (2002-2008 / SG, MK 2) Today's guide will show you the useful information for removing and replacing the timing belt on the Subaru Forester; the manufacturer states that th…
Resetting the Tyre Pressure Light on a Subaru Forester
Resetting the Tyre Pressure Light on a Subaru Forester
Subaru Forester (2008-2011 / SH, MK 3) In today's video, learn how to reset the tyre pressure light on a third-generation Subaru Forester. Before proceeding with the reset operation, ensur…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos