Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Subaru Outback wiper lever replacement

Model: Subaru Outback BP, MK 3, BL - Years 2003-2009

Let's see in this guide how to remove and replace the wiper lever on the Subaru Outback, following these simple steps. First of all we get on board the car and begin to remove the plastic cap that we find behind the steering wheel, unscrewing the screws with a Phillips screwdriver; then we go to lower the steering wheel and we go to disconnect the electrical connector of our wiper lever, as shown in the video. At this point we are going to unscrew the screws of the command, in order to remove it and replace it with the new one, applying the reverse procedure!

Posted on 10 May 2022 by ScegliAuto

Video tutorial

Related tutorials
…
Subaru Outback headlight bulb replacement
Subaru Outback headlight bulb replacement
Subaru Outback (2003-2009 / BP, MK 3, BL) Let's see how to replace the burned out bulbs in the front compartment of the Subaru Outback. We open the front hood, pulling the lever located in th…
Instructions for Replacing Wiper Blades
Instructions for Replacing Wiper Blades
Subaru Outback (1999-2003 / BE, BH, MK 2) Before proceeding with the replacement of the wiper blades, ensure that the ones you purchased are perfectly compatible by checking the length (gener…

Other guides you may be interested in

How to Replace the Bulbs on a Nissan Almera Rear Light

Do you want to change the damaged bulb of a rear light on a Nissan Almera? Follow this video carefully to proceed correctly. Open the boot, remove the fabric side covering, and detach the plastic rivets on the covering. Unscrew the retaining bolts of the rear light using a socket spanner. Once the light is free from the bolts, pull the rear light out of the metal housing, then disconnect the power cable. Place the stop light on a comfortable surface and replace all worn bulbs. To refit the rear light, position it in its housing and tighten all screws after reconnecting the lighting connector.

Watch the video!


by ScegliAuto

More videos