Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Lights on a Subaru Forester?

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part: Warning light – error code

This video shows how to reset the various maintenance lights on the Subaru Forester, including the service and oil change lights. These should only be reset after performing the maintenance they indicate. Use the buttons shown in the video to carry out the operations and hold the set button to enter the menu. Select the "maintenance" option, and from the new screen that opens, choose and reset the relevant maintenance item. The last option allows you to reset all items simultaneously.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Light on a Subaru Forester
Resetting the Tyre Pressure Light on a Subaru Forester
Subaru Forester (2008-2011 / SH, MK 3) In today's video, learn how to reset the tyre pressure light on a third-generation Subaru Forester. Before proceeding with the reset operation, ensur…
How to Reset the Tyre Warning Light on a Subaru Forester?
How to Reset the Tyre Warning Light on a Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) In this tutorial, you will learn how to reset the tyre warning light on a Subaru Forester. This operation is very simple and quick, to be performed o…
How to reset the TPMS light on the Subaru Forester 4
How to reset the TPMS light on the Subaru Forester 4
Subaru Forester (2012-2019 / MK 4, SJ) In the following guide, you will find the description of the steps you need to take to correctly complete the TPMS warning light reset procedure on t…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos