Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Outback
    4. : How do you replace the air filter on your Subaru Outback?

Subaru Outback - Video tutorial

Model: Subaru Outback BR, MK 4, BM - Years 2009-2014
Part: Air filter
Operation: How do you replace the air filter on your Subaru Outback?

To be able to replace the air filter on your Subaru Outback, you will need to open the hood and locate the air filter box, which is located at the right front headlight. Once this has been identified, it will be necessary to open it by releasing the fastening clips and disconnecting the tube connected to it. In doing so, the filter can be extracted from the inside and replaced with a new spare part. After the replacement, it will be possible to close the filter box again and connect the tube, lowering the hood of the engine compartment and checking that everything is working.


Posted on 25 November 2022 by ScegliAuto



How to replace the air filter on Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) Let's find out the procedure required to disassemble and replace the engine air filter of the Subaru Outback, in simple steps. First we open the engi
Subaru Outback air filter replacement
Subaru Outback (1999-2003 / BE, BH, MK 2) Let's see in this guide the steps on how to remove and replace the Subaru Outback engine air filter. First we open the engine hood and start by unscr
How to replace the cabin air filter on a 2007 Subaru Outback.
Subaru Outback (2003-2009 / BP, BL, MK 3) To avoid breathing poor quality and unpleasant air while using the air conditioning in your 2007 Subaru Outback, it is important to periodically repl

Other guides that may interest you

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos