Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Forester
    4. : How to change the window seal in the 2015 Subaru Forester?

Subaru Forester - Video tutorial

Model: Subaru Forester SJ, MK 4 - Years 2012-2019
Part: Checks and maintenance
Operation: How to change the window seal in the 2015 Subaru Forester?

To change the window seals of the 2015 Subaru Forester we need to equip ourselves with a flat screwdriver that will help us do this. We lower the window and insert the tip of the screwdriver under the first gasket that we want to remove, precisely in the middle of the window pillar and we pry. At the same time, we have to pull the seal off with our hands. Remove it completely, also freeing it from the second stop placed at the opposite end and then install the new gasket. This simply fits into the fasteners left free by the old gasket.


Posted on 29 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Forester 2012-2019 - What probable problems have emerged in the past with the 2012 Subaru Forester? Read Answer
    • Forester 2012-2019 - What are the main problems with the Subaru Forester? Read Answer
    • Forester 2012-2019 - What does the Subaru Forester check engine light mean? Read Answer
    • Forester 2012-2019 - What problems can the LPG Subaru Forester have? Read Answer
    • Forester 2008-2011 - What problems might the Subaru Forester 2.0 diesel present? Read Answer
    • Forester 2002-2008 - How much does the service cost of the Subaru Forester 1600 petrol? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos