Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Exhaust System Adjustment to Eliminate Vibrations

Model: Subaru Forester SG, MK 2 - Years 2002-2008
Part: Exhaust muffler

If you feel vibrations coming from the exhaust system while under the vehicle, it is likely that a joint has failed, creating play and vibrations that generate noise; lift the vehicle on suitable ramps to facilitate access to the underside, inspect the exhaust pipe to identify the area with play: in this case, the noise comes from the area where the pipe splits, just after the particulate filter; you can remedy this by applying a metal clamp to securely fasten the pipe (fully open the clamp to insert it without removing the pipe).

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Eliminate Exhaust Vibrations on Mazda 3
Eliminate Exhaust Vibrations on Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) In this video tutorial, you will see a possible solution to minimise metallic noises (vibrations) from your exhaust system. First, obtain a durable t…
How to Replace the Exhaust Silencer on a TM 125 Fi
How to Replace the Exhaust Silencer on a TM 125 Fi
Fi 125 In this short video tutorial, we will see how to disassemble and replace the silencer on a TM Racing Fi 125 motorcycle, following the instructions be…
How to Remove the Rear Number Plate on a Nissan Qashqai J11
How to Remove the Rear Number Plate on a Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this video, we will see the steps to remove the rear number plate and holder on a Nissan Qashqai J11, second series, and how to eliminate the vibr…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos