Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Subaru Outback

Model: Subaru Outback BS, MK 5 - Years 2014-2019
Part: Battery

To replace the ignition battery on this model of vehicle, the following description provides all the information and instructions needed to carry out the replacement correctly. Once you open the bonnet, the battery is located on the left side of the compartment. First, unscrew the screws securing the cross member above. Then disconnect the negative terminal first, followed by the positive terminal. Remove the battery from the compartment and replace it with the new one, then reconnect the positive terminal first and then the negative terminal, and finally reposition and secure the upper support plate.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Subaru Outback MK5
How to Replace the Battery on a Subaru Outback MK5
Subaru Outback (2014-2019 / BS, MK 5) In this guide, you will see the steps to disassemble and replace the battery on a fifth series Subaru Outback, following the instructions below. Firs…
How to Replace the Battery on a Subaru Outback
How to Replace the Battery on a Subaru Outback
Subaru Outback (2009-2014 / MK 4, BM, BR) To replace the battery on a Subaru Outback, open the bonnet to access the engine bay and locate the battery, which is positioned near the left front …
How to Replace the Remote Battery in a Subaru Outback
How to Replace the Remote Battery in a Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) To replace the remote battery in a Subaru Outback, use a tool to pry open the slot located in the central lower part of the remote: this will allow y…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos