Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Subaru Legacy BL, MK 4, BP - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located centrally, just behind the console: to access it, you will need to remove the glove box; first, open the glove box door, press on the sides to retract the limit stops so you can fold it down; unscrew the fixing pins of the glove box and remove it from its place by disconnecting the courtesy light connector; also remove the side trim of the centre tunnel to comfortably access the air duct; at this point, unclip the metal clips securing the filter container cover, remove the cover and extract the old filter, which consists of two pieces; then proceed in reverse for the installation of the new ones.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in the 2017 Subaru Legacy
How to Replace the Cabin Air Filter in the 2017 Subaru Legacy
Subaru Legacy (2014-2019 / BN, BS, MK 6) The procedure to correctly replace the cabin air filter in your 2017 Subaru Legacy is very similar to that seen in many other car models. Let's see h…
Engine Air Filter Replacement
Engine Air Filter Replacement
Subaru Legacy (2009-2014 / BM, BR, MK 5) The air filter housing is located at the front right of the engine bay (when viewed from the front), just behind the headlamp; unclip the metal clips…
Guide to Replacing the Engine Air Filter
Guide to Replacing the Engine Air Filter
Subaru Legacy (2003-2009 / BL, MK 4, BP) The engine air filter is a component of the vehicle's fuel system and serves to filter and clean the air that is drawn in from outside and delivered …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos