Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Subaru Legacy

Model: Subaru Legacy MK 4, BP, BL - Years 2003-2009
Part: Cabin air filter

To replace the cabin filter in the Subaru Legacy, loosen the screws securing the glove compartment on the passenger side: it must be opened to access the internal screws. Once these are unscrewed, remove the screws securing the plastics around the glove compartment, which will also need to be removed. This will expose the cover of the filter box, which must be removed to pull out the underlying filter; after replacing the filter, reassemble all previously removed components.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in the 2017 Subaru Legacy
How to Replace the Cabin Air Filter in the 2017 Subaru Legacy
Subaru Legacy (2014-2019 / BN, MK 6, BS) The procedure to correctly replace the cabin air filter in your 2017 Subaru Legacy is very similar to that seen in many other car models. Let's see h…
How to Replace the Rear Shock Absorber on a Subaru Legacy
How to Replace the Rear Shock Absorber on a Subaru Legacy
Subaru Legacy (2009-2014 / BM, MK 5, BR) Before you start, lift the rear end of your Subaru Legacy. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Next, using a ja…
What is the Fuse Layout for the Subaru Legacy?
What is the Fuse Layout for the Subaru Legacy?
Subaru Legacy (2009-2014 / BM, MK 5, BR) In this video, we can see where the fuse boxes of the Subaru Legacy are located and their respective layouts, useful in case you need to check the fu…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos