Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. : Equator

Suzuki Equator - Video guides

Suzuki Equator (2008-2012 / MK 1)
How to Install the Tow Hitch on a Suzuki Equator?
The Suzuki Equator is designed for tow hitch installation at the rear. After purchasing a suitable hitch for this vehicle, you can proceed with the …Read all…
Posted on 8 October 2026 by ScegliAuto
Suzuki Equator (2008-2012 / MK 1)
How to Replace the Windshield Wipers on a Suzuki Equator?
To replace the windshield wipers on a Suzuki Equator, lift the wiper arms so that the joint pin between the wiper and the arm is released. Once the old wiper …Read all…
Posted on 3 September 2026 by ScegliAuto
Suzuki Equator (2008-2012 / MK 1)
How to Change the Camshaft and Crankshaft Position Sensors on a Suzuki Equator
Learn how to change the camshaft position sensor and the crankshaft position sensor. Access the fender, which you will remove easily from the right front wheel …Read all…
Posted on 3 August 2026 by ScegliAuto
Suzuki Equator (2008-2012 / MK 1)
Location of the Fuse Boxes in a Suzuki Equator
This brief guide covers the location of the fuse boxes (interior and exterior) in the Suzuki Equator in simple and quick steps. First, locate the exterior fuse …Read all…
Posted on 11 July 2026 by ScegliAuto

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos