Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Camshaft and Crankshaft Position Sensors on a Suzuki Equator

Model: Suzuki Equator MK 1 - Years: 2008, 2009, 2010, 2011, 2012
Part: Crankshaft position sensor

Video tutorial

Learn how to change the camshaft position sensor and the crankshaft position sensor. Access the fender, which you will remove easily from the right front wheel that you have lifted.

You will easily identify the sensor, which is located near the opening. To remove it, you will need a socket wrench after taking off the rubber cover.

This applies to the camshaft position sensor. You can access the crankshaft position sensor from the engine bay if you have small enough hands to reach the green connector that will allow you to remove the crankshaft position sensor.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Replace the Windshield Wipers on a Suzuki Equator?
Suzuki Equator (2008-2012 / MK 1) To replace the windshield wipers on a Suzuki Equator, lift the wiper arms so that the joint pin between the wiper and the arm is released. Once the o…
How to Install the Tow Hitch on a Suzuki Equator?
How to Install the Tow Hitch on a Suzuki Equator?
Suzuki Equator (2008-2012 / MK 1) The Suzuki Equator is designed for tow hitch installation at the rear. After purchasing a suitable hitch for this vehicle, you can proceed with the i…
Location of the Fuse Boxes in a Suzuki Equator
Location of the Fuse Boxes in a Suzuki Equator
Suzuki Equator (2008-2012 / MK 1) This brief guide covers the location of the fuse boxes (interior and exterior) in the Suzuki Equator in simple and quick steps. First, locate the ext…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos