Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wipers on a Suzuki Equator?

Model: Suzuki Equator MK 1 - Years 2008-2012
Part: Windshield wipers

To replace the windshield wipers on a Suzuki Equator, lift the wiper arms so that the joint pin between the wiper and the arm is released. Once the old wiper is removed, insert the new one on both sides. After the wipers are installed, position them on the windshield and start the motor to ensure they work properly. It is recommended to use wipers of the size indicated in the tutorial.

Updated on 23 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Install the Tow Hitch on a Suzuki Equator?
How to Install the Tow Hitch on a Suzuki Equator?
Suzuki Equator (2008-2012 / MK 1) The Suzuki Equator is designed for tow hitch installation at the rear. After purchasing a suitable hitch for this vehicle, you can proceed with the i…
Location of the Fuse Boxes in a Suzuki Equator
Location of the Fuse Boxes in a Suzuki Equator
Suzuki Equator (2008-2012 / MK 1) This brief guide covers the location of the fuse boxes (interior and exterior) in the Suzuki Equator in simple and quick steps. First, locate the ext…
How to Change the Camshaft and Crankshaft Position Sensors on a Suzuki Equator
How to Change the Camshaft and Crankshaft Position Sensors on a Suzuki Equator
Suzuki Equator (2008-2012 / MK 1) Learn how to change the camshaft position sensor and the crankshaft position sensor. Access the fender, which you will remove easily from the right f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos