Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Tow Hitch on a Suzuki Equator?

Model: Suzuki Equator MK 1 - Years 2008-2012
Part: Accessory kit

The Suzuki Equator is designed for tow hitch installation at the rear. After purchasing a suitable hitch for this vehicle, you can proceed with the installation. It’s not difficult; just position the hitch bracket correctly and tighten the six bolts that secure it in place. However, due to the weight of this part, using a proper cart for positioning or the help of one or two people is necessary. Once positioned, simply tighten the bolts to complete the installation.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windshield Wipers on a Suzuki Equator?
Suzuki Equator (2008-2012 / MK 1) To replace the windshield wipers on a Suzuki Equator, lift the wiper arms so that the joint pin between the wiper and the arm is released. Once the o…
Location of the Fuse Boxes in a Suzuki Equator
Location of the Fuse Boxes in a Suzuki Equator
Suzuki Equator (2008-2012 / MK 1) This brief guide covers the location of the fuse boxes (interior and exterior) in the Suzuki Equator in simple and quick steps. First, locate the ext…
How to Change the Camshaft and Crankshaft Position Sensors on a Suzuki Equator
How to Change the Camshaft and Crankshaft Position Sensors on a Suzuki Equator
Suzuki Equator (2008-2012 / MK 1) Learn how to change the camshaft position sensor and the crankshaft position sensor. Access the fender, which you will remove easily from the right f…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos