Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Fuse Boxes in a Suzuki Equator

Model: Suzuki Equator MK 1 - Years 2008-2012
Part: Fuse box

This brief guide covers the location of the fuse boxes (interior and exterior) in the Suzuki Equator in simple and quick steps. First, locate the exterior fuse box, as well as the one in the engine compartment; remove the plastic cover found on the left side, next to the battery, to access it. The interior fuse box is located on the driver's side, next to the steering wheel; remove the plastic cover to access the internal fuses. Now, take the vehicle's owner's manual to find the fuse diagram and layout!

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windshield Wipers on a Suzuki Equator?
Suzuki Equator (2008-2012 / MK 1) To replace the windshield wipers on a Suzuki Equator, lift the wiper arms so that the joint pin between the wiper and the arm is released. Once the o…
How to Install the Tow Hitch on a Suzuki Equator?
How to Install the Tow Hitch on a Suzuki Equator?
Suzuki Equator (2008-2012 / MK 1) The Suzuki Equator is designed for tow hitch installation at the rear. After purchasing a suitable hitch for this vehicle, you can proceed with the i…
How to Change the Camshaft and Crankshaft Position Sensors on a Suzuki Equator
How to Change the Camshaft and Crankshaft Position Sensors on a Suzuki Equator
Suzuki Equator (2008-2012 / MK 1) Learn how to change the camshaft position sensor and the crankshaft position sensor. Access the fender, which you will remove easily from the right f…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos