Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Dr 200
Part: Engine oil

To replace the engine oil on the Suzuki DR 200, start when the engine is cold. Use a stand to keep the bike stable. Find and open the oil drain plug under the engine to drain the old oil into a container. Once drained, close the plug. On the left side of the engine, find and open the oil fill cap. Slowly pour in the new oil until it reaches the correct level on the oil dipstick. Check the level and add if necessary. Start the engine and let it run to distribute the oil. Recheck the level and securely close the fill cap. Dispose of the old oil properly.

Posted on 13 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a Suzuki DR 200?
How to change the motor oil of a Suzuki DR 200?
Dr 200 To change the motor oil of a Suzuki DR 200, first warm up the engine for a few minutes to fluidize the oil. Turn off the engine and place the motorcy…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos