Do it yourself
Frequently asked questions about cars and motorcycles

Model: Suzuki Dr 200
Part: Engine oil

To change the motor oil of a Suzuki DR 200, first warm up the engine for a few minutes to fluidize the oil. Turn off the engine and place the motorcycle on a stable stand. Find the oil drain plug located under the engine and place a container underneath it to collect the used oil. Use a wrench to loosen the drain plug and let the oil drain completely. Once the oil is fully drained, tighten the drain plug securely. Now, shift your focus to the oil fill plug located on top of the engine. Remove the fill plug and, using a funnel, slowly pour the correct amount of new motor oil as indicated in the owner's manual. Make sure to use the recommended type of oil for your Suzuki DR 200. After pouring the oil, replace the fill plug and ensure it is closed tightly. Start the engine and let it run for a few minutes to circulate the new oil, then turn off the engine and check for any leaks. If everything is in order, the oil change is complete.

Posted on 13 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Dr 200 To replace the engine oil on the Suzuki DR 200, start when the engine is cold. Use a stand to keep the bike stable. Find and open the oil drain plug …

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos