Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of the Suzuki Burgman 400

Model: Suzuki Burgman 400
Part: Wheel

Video tutorial

To remove the rear wheel of the Suzuki Burgman 400, you will need a 6 mm socket wrench with an extension. Unscrew the two nuts above and below the exhaust pipe.

Then remove the two bolts that hold the exhaust pipe to the wheel, which are clearly visible in the video. They are two 12 mm nuts.

Hold the silencer while you remove the last bolt, and store it safely. Now there are three more 14 mm bolts to remove, those from the fork.

You will now need a 17 mm socket wrench with an extension, as shown in the video. Use it to remove the wheel, which is now free.

Hold the wheel while you remove the bolts. Now we can take off the wheel.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

Removing the Rear Wheel of the Suzuki Burgman 400
Removing the Rear Wheel of the Suzuki Burgman 400
Burgman 400 Below are the instructions that will allow you to remove and replace the rear wheel of the Suzuki Burgman 400, following these simple steps. First, p…
How to replace the front bulb on a Suzuki Burgman 400
How to replace the front bulb on a Suzuki Burgman 400
Burgman 400 Before starting, position your Suzuki Burgman 400 on the centre stand, then turn the front wheel to the right. Next, lean down near the front headlam…
How to replace the front wheel bearing of the Suzuki Burgman 400
How to replace the front wheel bearing of the Suzuki Burgman 400
Burgman 400 In this video tutorial we will see how to disassemble and replace the front wheel bearing of the Suzuki Burgman 400 scooter. First of all, we put the…

How to Set the Clock on the Sym Jet14 125?

To adjust the clock on the Sym Jet14 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the M button located underneath until one of the numbers on the clock starts flashing. At this point, repeatedly press the S button, also located beneath the panel, to change that number. After making the change, press the M button to move on to the next numbers, finishing by turning off the panel.

Watch the video!


by ScegliAuto

More videos