Do it yourself
Frequently asked questions about cars and motorcycles
To replace the starter motor, lift the seat to access the screws securing the under-seat compartment from below. This will allow access to the components underneath. The starter motor will be present here, which must be disconnected from its connectors and freed from its mounting screws. By doing this, the old starter motor can be removed, and the new one can be fitted. Once it is correctly installed, remount the under-seat compartment to ensure everything functions correctly.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Burgman 400 This guide provides the main instructions on how to remove and replace the starter motor on a Suzuki Burgman 400. First, place the scooter on the cen…
Burgman 400 In today’s video, you will learn how to remove the starter motor on a Suzuki Burgman 400 by following the instructions below. First, lift the seat of…
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos