Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Burgman 400
Part: Clock

In this tutorial, you will learn how to set the time on the Suzuki Burgman 400 scooter, a very simple and quick operation to perform after disconnecting the battery or when switching to British Summer Time. First, insert the key and turn on the instrument panel. Then, press and hold the two buttons located at the bottom of the rev counter until the time starts to flash. At this point, adjust the hour with quick presses of the left button, the minutes with the right button, and save the setting by pressing both buttons together one last time.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear turn signals on the Suzuki Burgman 400 scooter?
How to replace the rear turn signals on the Suzuki Burgman 400 scooter?
Burgman 400 In this tutorial, we can see how to replace the rear turn signals on the Suzuki Burgman 400 scooter, a very simple and quick operation. First of all,…
How to Change the Engine Oil in a Suzuki Burgman 400 Scooter?
How to Change the Engine Oil in a Suzuki Burgman 400 Scooter?
Burgman 400 In this tutorial, see how to change the engine oil in a Suzuki Burgman 400 scooter, a very simple and quick operation. First, ensure that the engine …
Where is the battery located on the Suzuki Burgman 400 scooter?
Where is the battery located on the Suzuki Burgman 400 scooter?
Burgman 400 In this video, see where the battery is located on the Suzuki Burgman 400 scooter and how to proceed if you need to replace it. As shown, the battery…

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos