Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Gsx R 600
Part: Clutch

This guide will show you how to disassemble and replace the clutch on the Suzuki GSX-R 600 motorcycle, as well as the GSX-R 750. First, place the motorcycle on a stand and begin to remove the clutch cover; to do this, undo all the fastening screws found on the sides, then disconnect the clutch cable, as shown in the video. At this point, undo the screws of the clutch pack, subsequently removing all the plates; replace and install the new clutch plates, as well as the original ones, following the video tutorial to the end for reassembly!

Updated on 13 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the clutch of the Suzuki GSX-R 600?
How do you replace the clutch of the Suzuki GSX-R 600?
Gsx R 600 .. possible to replace the clutch of the Suzuki GSX-R 600 by loosening the screws that secure the clutch cover, located on the right side of the vehicle.. …
How do you replace the clutch of the Suzuki GSX-R 600?
How do you replace the clutch of the Suzuki GSX-R 600?
Gsx R 600 .. In order to replace the clutch of the Suzuki GSX-R 600, you need to loosen the screws that secure the side panel of the motorcycle, on the right side.. …
How to Replace the Clutch on a Suzuki GSX-R 600?
How to Replace the Clutch on a Suzuki GSX-R 600?
Gsx R 600 .. You can replace the clutch on the Suzuki GSX-R 600 by loosening the screws that secure the cover on the right side of the vehicle, in the lower central.. …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos