Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, we see how to reset the service interval on a Suzuki 1050. A 18g wire with 0.6 mm pins crimped at the ends was used for the operation. A 22g wire at 0.64 mm should work in the same way. Insert them into the red connector. At this point, simply turn on the ignition, scroll through the menu on your bike until you reach 'service', confirm, and access the 'reset' option, which allows you to exit simply with the yes/no option. This way, you can reset the service without going to the workshop and save a lot of money.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Levers on a Suzuki V-Strom DL1000?
How to Replace the Levers on a Suzuki V-Strom DL1000?
V Strom 1000 .. To replace the levers on a Suzuki V-Strom DL1000, first loosen the screws securing the handguard on the side of the handlebar. Once these.. …
How do you replace the headlight bulb of the Suzuki V-Strom 1000?
How do you replace the headlight bulb of the Suzuki V-Strom 1000?
V Strom 1000 .. to replace the headlight bulb of the Suzuki V-Strom 1000, you need to access the inside of the front fairing: here you will be able to locate the internal.. …
How to Replace the Rear Shock Absorber on a Suzuki V-Strom 1000?
How to Replace the Rear Shock Absorber on a Suzuki V-Strom 1000?
V Strom 1000 .. To replace the rear shock absorber on a Suzuki V-Strom 1000, loosen the bolts securing it to its housing, which is located in the central part of the.. …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos