|
Do it yourself
| |||
| ||||
|
Model: Suzuki Burgman 400
If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following guide and follow the steps described. First of all, make sure to start the procedure with the Suzuki Burgman 400 dashboard completely off, then press the "Adj" button for two seconds and then start the dashboard. Keep the button pressed for a little longer and release it as soon as the oil light disappears from the central dashboard of your Suzuki Burgman 400.
Posted on 27 April 2024 by ScegliAuto
Video tutorial
Related tutorials
Burgman 400
The reset of the Oil Change light on the Suzuki Burgman 400 is done by rotating the special key inside the ignition switch: once the instrument panel…
Burgman 400
In order to replace the transmission oil of the Suzuki Burgman 400 you have to unscrew the screws that secure the transmission housing, positioned at…
Burgman 400
To reset the service light on a Suzuki Burgman 400 scooter, after actually changing the oil and filter as required by the service, we need to press t…
|
How to Replace the Coolant on a Derbi GPR 50
This guide will show you how to drain and replace the coolant in the engine of the Derbi GPR 50 motorcycle. First, place the motorcycle on a stand, ensuring the engine is cold. Disconnect the radiator hose from the water pump and let the fluid drain into a container for about ten minutes, as shown in the video. At this point, unscrew the radiator cap to refill with the correct type of antifreeze, adding more if necessary after starting the engine. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
