Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the thermostat of the Suzuki SX4?

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Thermostat

In order to replace the thermostat of the Suzuki SX4, you need to open the hood so that you can access the components located inside the engine compartment: here you will be able to locate, at the rear of the engine block, the exhaust manifold. The thermostat will be located right at that manifold and must be removed from its housing by disconnecting the tubes for the coolant passage and unscrewing the support screws. Once the thermostat has been removed, you can install the new one, reassembling all the components previously removed.

Posted on 19 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the Thermostat in the Suzuki SX4?
Where is the Thermostat in the Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) This video shows where the thermostat is located in the Suzuki SX4, useful if you need to replace it. As shown, the valve is positioned at the front …
How do you replace the headlight bulb of the Suzuki SX4?
How do you replace the headlight bulb of the Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) To replace the front headlight bulb on the Suzuki SX4, you need to open the hood so that you can loosen the screws that secure the front bumper from …
How do you replace the license plate bulb on the Suzuki SX4?
How do you replace the license plate bulb on the Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) It will be possible to replace the license plate bulb of the Suzuki SX4 by prying with an object to remove the device from its housing: once the old …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos