Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Thermostat in the Suzuki SX4?

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Thermostat

This video shows where the thermostat is located in the Suzuki SX4, useful if you need to replace it. As shown, the valve is positioned at the front of the engine, about halfway up on the right side. The thermostat is secured to the engine block with three bolts, which can be easily removed using a socket spanner. Before proceeding with its replacement, it is advisable to drain some coolant to avoid any dangerous spills. Also, ensure the engine is sufficiently cool for safety.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the thermostat of the Suzuki SX4?
How do you replace the thermostat of the Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) In order to replace the thermostat of the Suzuki SX4, you need to open the hood so that you can access the components located inside the engine compa…
How to reset the tire pressure on Suzuki SX4
How to reset the tire pressure on Suzuki SX4
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the tire pressure on the Suzuki SX4, you can follow these general steps. Turn on the car: make sure all tires are inflated to the correct pr…
Where is the fuse box of the Suzuki SX4 located?
Where is the fuse box of the Suzuki SX4 located?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Inside the Suzuki SX4, two fuse boxes are installed. The first fuse box is located inside the engine compartment, specifically on the left side near …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos