Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove and replace the gear knob of the Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 3 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Shift knob

See other generations:
Video tutorial

These short and simple steps will show us how to disassemble and replace the gear shift knob of the Suzuki Grand Vitara. First, we get into the car and start unscrewing the gear shift knob counterclockwise with force to remove it; then we proceed to install the new knob on the gear shift lever, screwing it clockwise, as shown in the video.

If necessary, before reassembling the knob, we also replace the gear shift lever boot; make sure the new knob is securely attached to the lever, installing the original one to ensure compatibility.


Posted on 26 August 2025 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on the Suzuki Grand Vitara 2
How to Replace the Gear Knob on the Suzuki Grand Vitara 2
Suzuki Grand Vitara (2005-2015 / MK 2) To correctly replace the gear knob in your Suzuki Grand Vitara second series (2005-2015), follow these simple steps. The standard knob is simply scre…
How to Remove the Clutch from a Suzuki Grand Vitara
How to Remove the Clutch from a Suzuki Grand Vitara
Suzuki Grand Vitara (1999-2005 / MK 1) Begin by lifting your Suzuki Grand Vitara, then remove the driveshaft, the lower cover supporting the gearbox, and anything else obstructing the extr…
How to Replace the Clutch on a Suzuki Grand Vitara
How to Replace the Clutch on a Suzuki Grand Vitara
Suzuki Grand Vitara (1999-2005 / MK 1) Before you can start, lift your Suzuki Grand Vitara. Begin by removing the driveshaft, the lower panel that supports and protects the gearbox, and an…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos