Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on the Suzuki Grand Vitara 2

Model: Suzuki Grand Vitara MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Shift knob

See other generations:
Video tutorial

To correctly replace the gear knob in your Suzuki Grand Vitara second series (2005-2015), follow these simple steps. The standard knob is simply screwed onto the shaft, so to remove it, rotate it counter-clockwise.

Once done, take the new knob and ensure it is fully compatible with your Suzuki Grand Vitara Mk2. Finally, position it on the shaft and rotate it clockwise until fully fitted. You can then perform a few test shifts to complete the process.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant in the Suzuki Grand Vitara?
How to Replace the Coolant in the Suzuki Grand Vitara?
Suzuki Grand Vitara (2005-2015 / MK 2) To replace the coolant in the Suzuki Grand Vitara, open the bonnet to access the engine compartment and remove the coolant top-up cap. Next, access t…
How to replace the timing belt on the Suzuki Grand Vitara?
How to replace the timing belt on the Suzuki Grand Vitara?
Suzuki Grand Vitara (1999-2005 / MK 1) To replace the timing belt on the Suzuki Grand Vitara, open the bonnet to access the components located inside the engine compartment: at the front o…
How to Replace the Timing Chain on a Suzuki Grand Vitara?
How to Replace the Timing Chain on a Suzuki Grand Vitara?
Suzuki Grand Vitara (2005-2015 / MK 2) To replace the timing chain on a Suzuki Grand Vitara, loosen the bolts securing the right front wheel: once removed, proceed to take it off along wit…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos