Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in the Suzuki Grand Vitara?

Model: Suzuki Grand Vitara MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Antifreeze coolant

See other generations:
Video tutorial

To replace the coolant in the Suzuki Grand Vitara, open the bonnet to access the engine compartment and remove the coolant top-up cap. Next, access the lower part of the engine compartment by unscrewing the drain plug and collecting the fluid in a suitably positioned container.

Once the old coolant has completely drained out, close the drain plug and refill the coolant through the top-up cap.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Replace the Differential Oil in a Suzuki Grand Vitara
How to Replace the Differential Oil in a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) In this video, learn how to change the differential oil in a Suzuki Grand Vitara. Position the car on a column lift and raise it to a comfortable hei…
How to replace the timing belt on the Suzuki Grand Vitara?
How to replace the timing belt on the Suzuki Grand Vitara?
Suzuki Grand Vitara (1999-2005 / MK 1) To replace the timing belt on the Suzuki Grand Vitara, open the bonnet to access the components located inside the engine compartment: at the front o…
How to Replace the Rear Shock Absorber of the Suzuki Grand Vitara
How to Replace the Rear Shock Absorber of the Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) To replace the rear shock absorber of the Suzuki Grand Vitara, lift the car with a jack or ramp so that the corresponding wheel is not in contact wit…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos