|
Do it yourself
| |||
| ||||
How to Reset the Oil Change Reminder on a Suzuki Baleno from the Instrument Cluster
Model: Suzuki Baleno
MK 2
- Years 2015-2026
To reset the oil change reminder on the Suzuki Baleno, work only from the instrument cluster. With the car stationary, turn on the ignition, leaving the engine off, so that the central display lights up and the OIL light is illuminated at the top. Use the onboard computer button (the same one used to scroll through mileage and clock) to change the screen until the oil section appears, indicated by the 'oIL' text and the mileage value. When on the oil screen, press and hold the same button for a few seconds: the value on the display will start to change and the message 'oIL rSt' will appear, indicating the reset mode. Continue to hold until the message 'SUCCES' appears on the display, indicating that the reset was successful. Immediately after, the oil counter will be reset to the new value set by the manufacturer, and the oil change reminder will be updated. At this point, you can release the button, turn off, and turn on the ignition to verify that no oil service warnings appear on the Suzuki Baleno.
Posted on 5 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Suzuki Baleno
(2015-2026 /
MK 2)
In today's video, you will see how to reset the service light on the Suzuki Baleno. First, get into the car and take a seat in the driver's seat. Now…
Suzuki Baleno
(2015-2026 /
MK 2)
To reset the service light on a Suzuki Baleno, after performing the scheduled services, get in the vehicle, close all four doors, and turn on the ign…
Suzuki Baleno
(2015-2026 /
MK 2)
In this guide, we will look at the instructions that will allow us to reset the partial mileage counter of the Suzuki Baleno. First, let's get inside…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.139
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |