Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Suzuki
  4. :
  5. Grand Vitara
  6. : How to remove the bulbs of a Suzuki Grand Vitara

Suzuki Grand Vitara - Video tutorial

Model: Suzuki Grand Vitara MK 2 - Years 2005-2015
Part: Headlight bulb
Operation: How to remove the bulbs of a Suzuki Grand Vitara

Let's see how to remove the bulbs of a Suzuki Grand Vitara? We open and lift the front hood by pulling the lever located at the bottom right of the dashboard (let's secure it with the rod). We find the round-shaped inspection cap (placed in the rear part of the lighthouse) and remove it. We take out the lamp holders from the headlight and we go to extract the damaged bulbs with the help of a screwdriver. We assemble the new bulbs and (always suitable type and size) we insert the lamp holder inside the lighthouse. We reassemble all the previously disassembled pieces. Let's test how it works.


Posted on 24 November 2023 by ScegliAuto

This video is currently unavailable


Replacement headlight bulbs on Suzuki Grand Vitara
Suzuki Grand Vitara (1999-2005 / MK 1) Let's replace the Grand Vitara headlight bulbs, let's see how. We open the hood of the engine compartment, remove with a screwdriver the tightening c
Replacement of license plate bulbs on Suzuki Grand Vitara
Suzuki Grand Vitara (1999-2005 / MK 1) Replacing the license plate bulbs of a Grand Vitara. Let's see how they change the targa spotlight from inside. We locate the spotlight above the pla
How to replace the rear headlight lights on Suzuki Grand Vitara 2
Suzuki Grand Vitara (2005-2015 / MK 2) Today we will see, in this video tutorial, how to remove and replace the rear light bulbs, in particular the stop light bulb, of the Suzuki Grand Vit

    Frequently Asked Questions

    • Grand Vitara 2005-2015 - How to replace front sidelamps on Suzuki Grand Vitara? Read Answer
    • Grand Vitara 1999-2005 - How to replace the headlight bulb on a Suzuki Grand Vitara? Read Answer

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos