Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Warning Light on Suzuki Swift

Model: Suzuki Swift MK 4, Rs41 - Years 2004-2010
Part: Warning light – error code

Reset the service light on a Suzuki Swift? Here's how to reset the oil service warning light. Turn on the instrument cluster of the Suzuki with the key. Once the instrument cluster display is on, use the control button to the right of the instrument cluster. Press and hold the button until the maintenance message (Oil) starts flashing, then turn off the instrument cluster immediately. Turn on the instrument cluster again with the ignition key to check the reset of the oil warning light; you should no longer see the oil service maintenance light if everything has gone well.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Suzuki Swift
How to Reset the Service Light on a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) To reset the Service light on a Suzuki Swift, there is no procedure that can be executed from the onboard computer settings. You will need to connect…
How to Reset the Engine Oil Light on a Suzuki Swift
How to Reset the Engine Oil Light on a Suzuki Swift
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) This guide briefly explains the procedure to reset the service light for the oil change on a Suzuki Swift. First, get in the vehicle and turn on the …
How to Perform a Service Reset on a Suzuki Swift
How to Perform a Service Reset on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) On the Suzuki Swift, the maintenance interval and oil change reset is done from the instrument cluster. With the Suzuki Swift stationary and the engi…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos