Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Front Headlight Bulbs on a Sx4

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Headlight bulb

Are the bulbs on the Sx4 due for replacement? Let's remove and replace the bulbs. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and lift it. Locate the inspection cap of the headlight and detach it from behind the headlight. Release the bulbs from the plastic clips; pull out the bulb holders from the headlight and extract the damaged bulbs with the help of a screwdriver. Fit the new bulbs (always ensure they are the correct type and size) and insert the bulb holder into the headlight housing. Test the operation of the new bulbs and finally cover the headlights with the cover caps.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on the Suzuki SX4 - Fiat Sedici
How to Replace the Front Headlamp Bulb on the Suzuki SX4 - Fiat Sedici
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Today, follow these instructions to replace the front headlamp bulb on the Suzuki SX4 and Fiat Sedici. First, open the bonnet and remove the plastic …
Replacing Front Headlamp Bulb on Suzuki SX4
Replacing Front Headlamp Bulb on Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Are the bulbs in the front headlamp of your Suzuki SX4 blown and need changing? Here's how to replace them. Open the front bonnet where the headlamps…
How do you replace the headlight bulb of the Suzuki SX4?
How do you replace the headlight bulb of the Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) To replace the front headlight bulb on the Suzuki SX4, you need to open the hood so that you can loosen the screws that secure the front bumper from …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos