Do it yourself
| ||||
|
Suzuki Sx4 - Video tutorial
Model: Suzuki Sx4
MK 1, RW, EY, GY
- Years 2006-2014 This very short video shows the operation to extract the radio block of a Suzuki Sx4. First of all, it is necessary to remove the vertical frames placed at the edges of the radio block. They are attached by clips and to detach them you will have to use a metal lever (or rigid plastic) being careful not to chip any component. Remove the two frames starting from the bottom. You will now have access to the four screws that secure the radio block: remove them with a Phillips screwdriver and take out the radio block. Disconnect the electrical connections and that's it.
Posted on 8 July 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |