Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in Sx4 Key

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

Is your key not working anymore? Let’s replace the battery inside the Sx4 key. Take your remote key and, using a screwdriver, remove the tiny screw. Then, lever the two parts of the plastic key cover apart with a screwdriver.

Remove the battery holder from inside the key and take out the old battery. Replace it with a new one of the same size.

Reassemble the plastic parts of the remote key by pressing them together and screw in the fastening screw. Check the proper functioning of the remote key with the dedicated buttons.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Replacing the Rear Wiper Blade on a Suzuki SX4
Replacing the Rear Wiper Blade on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) Today, we'll go through the steps to remove and replace the rear wiper blade on a Suzuki SX4. First, move to the rear of the vehicle and lift the wip…
Timing Belt Replacement Suzuki SX4 2.0L Diesel
Timing Belt Replacement Suzuki SX4 2.0L Diesel
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In this video tutorial, you will learn how to remove and replace the timing belt and tensioner on a Suzuki SX4 2.0L Diesel. First, lift the vehicle a…
Guide to Replacing the Alternator on a Suzuki Sx4
Guide to Replacing the Alternator on a Suzuki Sx4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) This guide shows you how to remove and replace the alternator on a Suzuki Sx4, following the instructions below. First, open the bonnet and start by …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos