Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Alternator on a Suzuki Sx4

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Alternator

This guide shows you how to remove and replace the alternator on a Suzuki Sx4, following the instructions below. First, open the bonnet and start by disconnecting the alternator belt by loosening the tensioner with a spanner; then lift the vehicle and remove the front right wheel and the wheel arch liner to gain access, as illustrated in the video. Now unscrew the alternator bolts and disconnect the electrical connector to remove it and replace it with the new one, using the original part, following the video to the end!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Alternator on a Suzuki SX4 2.0L
Replacement of the Alternator on a Suzuki SX4 2.0L
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) In this guide, we will cover the main instructions on how to remove and replace the alternator on a Suzuki SX4 2.0L (engine code J20B). First, lift t…
Replace Alternator on Suzuki Sx4
Replace Alternator on Suzuki Sx4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Remove the alternator from a Suzuki Sx4. Lift the car with a jack and remove the front right wheel. Disconnect the battery terminals. Use a socket sp…
How to Remove and Replace the Alternator Belt on the Suzuki SX4
How to Remove and Replace the Alternator Belt on the Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Below are step-by-step instructions to remove and replace the alternator belt on the Suzuki SX4, as well as the Fiat Sedici. First, lift the vehicle …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos