Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Alternator Belt on the Suzuki SX4

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: V-belt

Below are step-by-step instructions to remove and replace the alternator belt on the Suzuki SX4, as well as the Fiat Sedici. First, lift the vehicle and remove the front right wheel; then, remove the wheel arch liner and loosen the belt tensioner with a socket spanner, removing the V-belt from the various pulleys, as shown in the video. At this point, install the new original alternator belt, inserting it in the correct direction, and turn it by hand initially to ensure correct placement.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Alternator on a Suzuki SX4 2.0L
Replacement of the Alternator on a Suzuki SX4 2.0L
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) In this guide, we will cover the main instructions on how to remove and replace the alternator on a Suzuki SX4 2.0L (engine code J20B). First, lift t…
Replace Alternator on Suzuki Sx4
Replace Alternator on Suzuki Sx4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Remove the alternator from a Suzuki Sx4. Lift the car with a jack and remove the front right wheel. Disconnect the battery terminals. Use a socket sp…
Guide to Replacing the Alternator on a Suzuki Sx4
Guide to Replacing the Alternator on a Suzuki Sx4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) This guide shows you how to remove and replace the alternator on a Suzuki Sx4, following the instructions below. First, open the bonnet and start by …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos