Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Timing Belt Replacement Suzuki SX4 2.0L Diesel

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Timing belt

In this video tutorial, you will learn how to remove and replace the timing belt and tensioner on a Suzuki SX4 2.0L Diesel. First, lift the vehicle and remove the front right wheel. Then, take off the plastic wheel arch and remove the oil sump protection by unscrewing all the fastening screws. At this point, access the pulleys and the belt, where you will loosen the tensioner with a spanner to extract and replace the belt, as shown in the video; just follow it to the end!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the replacement interval for the timing belt on the Suzuki Sx4
What is the replacement interval for the timing belt on the Suzuki Sx4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) The timing belt is a toothed rubber strip that transmits the movement from the crankshaft to the camshafts, which control the opening and closing of …
Guide to replacing the timing chain of the Suzuki SX4
Guide to replacing the timing chain of the Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) In these brief steps, let's see how to disassemble and replace the timing chain of the Suzuki SX4, as well as the Fiat Sedici. First, open the hood a…
How to replace the timing belt on the Suzuki SX4?
How to replace the timing belt on the Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) You can replace the timing belt on the Suzuki SX4 by lifting the car and completely removing the front right wheel, along with the corresponding whee…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos