Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Internal Door Handle of a Suzuki Vitara

Model: Suzuki Vitara JT - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Handle

See other generations:
Video tutorial

Before you can start, open the door of your Suzuki Vitara. Begin by unscrewing and removing the screw inside the handle.

Once the screw is removed, the handle will be free. To remove it, simply pull it out. When you have extracted the handle from its housing, to remove it completely, just disconnect the release cable, and you will have finished the disassembly.

At this point, to fit the new handle, simply follow these steps in reverse. By doing this, you will have successfully completed the replacement.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Remove Internal Handle on Suzuki Vitara
How to Remove Internal Handle on Suzuki Vitara
Suzuki Vitara (1988-1998 / MK 1, TA, ET) Learn how to remove the door opening lever on the Vitara (door handle). Detach the trim piece around the handle, then disconnect the door opening lev…
How do you remove the door panel of the Suzuki Vitara?
How do you remove the door panel of the Suzuki Vitara?
Suzuki Vitara (1988-1998 / MK 1, TA, ET) In order to remove the door panel of the Suzuki Vitara, you need to loosen all the screws that hold it in place: these screws can be found in the hou…
How to Change the Gear Knob on a Suzuki Vitara
How to Change the Gear Knob on a Suzuki Vitara
Suzuki Vitara (2005-2015 / JT) Watch this video to learn how to change the gear knob on a Suzuki Vitara. The same procedure applies to the Suzuki Swift and S-Cross. You can find th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos