Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Internal Handle on Suzuki Vitara

Model: Suzuki Vitara TA, MK 1, ET - Years 1988-1998
Part: Handle

Learn how to remove the door opening lever on the Vitara (door handle). Detach the trim piece around the handle, then disconnect the door opening lever. Using a screwdriver, unscrew the screws located inside the space where the door opening lever is. Use a plastic spatula to unclip the plastic by levering around the entire perimeter, then remove it by hand. Disconnect the opening lever cable from behind the lever. Fit the new protective plastic inside the door panel, then attach the opening lever to the release hook. Screw in the securing screws.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Internal Door Handle of a Suzuki Vitara
How to Replace the Internal Door Handle of a Suzuki Vitara
Suzuki Vitara (2005-2015 / JT) Before you can start, open the door of your Suzuki Vitara. Begin by unscrewing and removing the screw inside the handle. Once the screw is removed, t…
How to disassemble the rear door panel of the Suzuki Vitara
How to disassemble the rear door panel of the Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) The following steps will illustrate the process of disassembling the rear door panel of the Suzuki Vitara, following the instructions below. First, w…
How to Remove the Door Panel on a Suzuki Vitara 3
How to Remove the Door Panel on a Suzuki Vitara 3
Suzuki Vitara (2015-2024 / LY) In this video tutorial, you will learn how to remove the front door panel on a third-generation Suzuki Vitara in simple steps. First, open the front …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos