Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Suzuki Vitara 3

Model: Suzuki Vitara LY - Years 2015-2024
Part: Door trim panel

In this video tutorial, you will learn how to remove the front door panel on a third-generation Suzuki Vitara in simple steps. First, open the front door and use a screwdriver to remove the screws located on the grab handle and the opening handle; then unscrew the additional screws found on the sides of the panel. At this point, start to lever the sides of the panel at several points to detach it; once removed, disconnect the electrical connector of the switch panel and the handle cable, as shown in the video!

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel on the Suzuki Vitara
How to Remove the Rear Door Panel on the Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) Today's main steps will show you how to remove and replace the rear door panel on the Suzuki Vitara. First, open the rear door and start removing the…
How to Remove the Door Panel (Front Right) on a Suzuki Vitara
How to Remove the Door Panel (Front Right) on a Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) How to remove the door panel (front right) on a Suzuki Vitara? Follow these steps: disconnect the battery terminals located in the engine bay, using …
Removing the Front Door Panel on the Suzuki Vitara
Removing the Front Door Panel on the Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) Briefly, here are the instructions to remove and replace the front door panel on the Suzuki Vitara. First, open the front door and start by removing …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos