Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Tire Pressure" Light on a Suzuki Swift

Model: Suzuki Swift MK 6, A2L - Years 2017-2024
Part: Warning light – error code

To reset the light, start by sitting in the driver's seat of your Suzuki Swift and then start the engine. Once the engine is running, get out of the vehicle and inflate the tyre using a compressor to 2.5 bar (36 psi). After this, repeat the process for all tyres. When all tyres are inflated to 2.5 bar, sit back in the driver's seat, where you will notice that the low tyre pressure light is off. This completes the successful reset of the "Tire Pressure" light.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Suzuki Swift?
How to reset the tyre pressure warning light on the Suzuki Swift?
Suzuki Swift (2017-2024 / MK 6, A2L) To reset the tyre pressure warning light on the Suzuki Swift, inflate the tyres to the optimal pressure value: this value is indicated on the sticker…
How to reset the tyre pressure warning light on a Suzuki Swift?
How to reset the tyre pressure warning light on a Suzuki Swift?
Suzuki Swift (2017-2024 / MK 6, A2L) To reset the tyre pressure warning light on a Suzuki Swift, first inflate all the tyres to the pressure specified on the sticker located on the drive…
How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?
How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?
Suzuki Swift (2017-2024 / MK 6, A2L) To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the ri…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos