Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Gear Knob on a Suzuki Swift

Model: Suzuki Swift MK 4, Rs41 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Shift knob

See other generations:
Video tutorial

Let's look at removing the gear knob on a Suzuki Swift and the protective gaiter. Take the knob in your hands and rotate it left and right until you can remove it from the gear lever.

Use a plastic lever to disconnect the leather gaiter frame (if being replaced). First, fit the new leather gaiter with the clips (if removed), then place the knob back on the lever.

Take the new knob and slide it onto the lever in the centre console until it is secured. Ensure a thorough check for proper assembly of the plastics and all components.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Replacing the Gear Knob on a Suzuki Swift
Replacing the Gear Knob on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Below are the instructions needed to remove and replace the gear knob on the automatic gearbox of the Suzuki Swift in simple and quick steps. First, …
Removing and replacing the gear knob of the Suzuki Swift
Removing and replacing the gear knob of the Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Today, follow the steps to remove and replace the gear knob of the Suzuki Swift. First, get inside the vehicle and start by pulling the gear knob off…
How to Install the Gear Knob on a Suzuki Swift
How to Install the Gear Knob on a Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Replacing the gear knob on a Suzuki Swift is a simple and quick task to do yourself; in fact, on this model, it is not necessary to remove the gaiter…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos