Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Suzuki Swift Battery Replacement

Model: Suzuki Swift AZG, MK 5, Rs41 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Battery

See other generations:
Video tutorial

Lift the bonnet and insert the support rod. Locate the battery and start by loosening and disconnecting the negative terminal with a 10 mm spanner, which is on your right (if you are facing the cabin). Next, loosen the positive terminal on your left, then prepare a 12 mm socket with an extension to reach the bolt securing the battery, located at the bottom, also on your left.

That's it! These simple steps are all you need to remove the battery. Reverse the process for reassembly.

Good luck!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Perform a Service Reset on a Suzuki Swift
How to Perform a Service Reset on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) On the Suzuki Swift, the maintenance interval and oil change reset is done from the instrument cluster. With the Suzuki Swift stationary and the engi…
Replacement of the fuel filter of the Suzuki Swift
Replacement of the fuel filter of the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Today we will see the procedure for disassembling and replacing the diesel fuel filter of the Suzuki Swift. First, we open the car's engine hood and …
How to Replace the Battery in the Suzuki Swift
How to Replace the Battery in the Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Below are the necessary instructions to remove and replace the battery in the Suzuki Swift, following these simple and quick steps. First, open the b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos