Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Remote Control Battery on a Suzuki Alto

Model: Suzuki Alto MK 7 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

This guide shows how to replace the battery in the remote control of a Suzuki Alto. First, unscrew the small fixing screw on the back cover of the remote and remove the circuit board housing. Using a flathead screwdriver, separate the two halves of the extracted piece through the notch on the remote; inside, you will find the battery.

Replace it with a CR1620 battery. Follow the steps in reverse to reassemble the device.

The replacement is now complete. The tools required for the replacement are: flathead screwdriver; small star screwdriver.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

…
Suzuki Alto (2008-2014 / MK 7) To replace the battery in the Suzuki Alto, open the bonnet to access the components in the engine bay. On the right side, near the left headlamp, you…
Suzuki Alto (2008-2014 / MK 7) Through this very brief video guide, you will see how to replace the battery of a Suzuki Alto key, a model produced from 2008 to 2014. First, unscrew…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos