Do it yourself
Frequently asked questions about cars and motorcycles

Handbrake Travel Adjustment

Model: Suzuki Liana MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Parking brake

Video tutorial

Adjust the handbrake travel by acting on the adjustment nut located just below the handbrake lever; start by removing the plastic cover of the centre tunnel (both the outer cover and the underlying support must be removed). At this point, you can access the adjustment nut located at the rear of the lever: insert a socket wrench and tighten the nut until the handbrake travel reaches four or five clicks at most.

Then proceed in reverse for reassembly.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Suzuki Liana (2001-2007 / MK 1) To change the front brake pads of the Suzuki Liana, it is essential to secure the vehicle. Park it on a flat surface, engage the handbrake, and place…
Suzuki Liana (2001-2007 / MK 1) If you own a Suzuki Liana (2001-2007) and do not know where the fuse box containing all the various fuses is located, do not worry as this guide will…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos