Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Window Regulator in a Suzuki Vitara

Model: Suzuki Vitara TA, MK 1, ET - Years 1988-1998
Part: Checks and maintenance

To replace the window regulator in a Suzuki Vitara, completely remove the door panel to access the parts behind it. Next, fully lower the glass using the button so that the mechanism is accessible through the hole in the door. At this point, loosen the bolts located at the top of the door and on the mechanism. After removing the bolts, also disconnect the connector attached to the mechanism. Once all parts are removed, you can replace the window regulator.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Suzuki Vitara (2015-2024 / LY) Briefly, here are the instructions to remove and replace the front door panel on the Suzuki Vitara. First, open the front door and start by removing …
Suzuki Vitara (2015-2024 / LY) Today's main steps will show you how to remove and replace the rear door panel on the Suzuki Vitara. First, open the rear door and start removing the…
Suzuki Vitara (2015-2024 / LY) The following steps will illustrate the process of disassembling the rear door panel of the Suzuki Vitara, following the instructions below. First, w…

    Frequently Asked Questions

    • Vitara 2015-2024 - What problems does the Suzuki Vitara Hybrid have? Read answer
    • Vitara 2015-2024 - How many km do you have to carry out a service on the Suzuki Vitara? Read answer
    • Vitara 1988-1998 - Where does the jack of a Suzuki Vitara fit in? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos