Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Roof Cover Panel on a Suzuki Vitara

Model: Suzuki Vitara TA, MK 1, ET - Years 1988-1998
Part: Checks and maintenance

Begin by entering the vehicle and start removing the various components. Remove the side handles of the headlining using a screwdriver, then take off the sun visors and the various lights fixed to the panel. If the vehicle is equipped with a sunroof, open it before removing the panel. Once everything is detached, pull the headlining panel away from the perimeter of the roof. Extract the cover panel from inside the vehicle, preferably from the boot. Fit a new panel or reattach the same one after having it repaired.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Antenna of a Suzuki Vitara
How to Replace the Antenna of a Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) Before you can start, exit the cabin of your Suzuki Vitara and head to the external antenna. Begin by unscrewing and removing the long section of the…
Removing the Boot Door Panel on a Suzuki Vitara MK1
Removing the Boot Door Panel on a Suzuki Vitara MK1
Suzuki Vitara (1988-1998 / TA, MK 1, ET) In this video tutorial, you will learn how to remove the boot door panel on the first generation Suzuki Vitara by following these simple and quick st…
How to Reset the "Service" Light on a Suzuki Vitara?
How to Reset the "Service" Light on a Suzuki Vitara?
Suzuki Vitara (2015-2024 / LY) Good morning, today’s objective is to reset the "Service" light on your Suzuki Vitara. Start by sitting in the driver’s seat, then turn on the instru…

    Frequently Asked Questions

    • Vitara 2015-2024 - What problems does the Suzuki Vitara Hybrid have? Read answer
    • Vitara 2015-2024 - How many km do you have to carry out a service on the Suzuki Vitara? Read answer
    • Vitara 1988-1998 - Where does the jack of a Suzuki Vitara fit in? Read answer

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos