Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Software Version and Navigation Update on Suzuki Vitara

Model: Suzuki Vitara LY - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Checks and maintenance

See other generations:
Video tutorial

In this video tutorial, you will learn how to check the software version to see if updates are available on a Suzuki Vitara fourth generation. First, get inside the vehicle and turn on the multimedia system; then press and hold the settings button, and you will see all the software version information appear on the display.

At this point, check if the installed version is the most recent; if there are new updates, you will need to download and install them on the vehicle!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Suzuki Vitara?
How to Reset the "Service" Light on a Suzuki Vitara?
Suzuki Vitara (2015-2024 / LY) Good morning, today’s objective is to reset the "Service" light on your Suzuki Vitara. Start by sitting in the driver’s seat, then turn on the instru…
How to Open the Fuel Filler Cap on the Suzuki Vitara?
How to Open the Fuel Filler Cap on the Suzuki Vitara?
Suzuki Vitara (2015-2024 / LY) In this tutorial, see how to open the fuel filler cap on the Suzuki Vitara, a very simple operation that follows the typical procedure for most vehic…
How to Set the Time on the Suzuki Vitara
How to Set the Time on the Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) These simple steps will allow you to adjust the clock on the Suzuki Vitara. First, get inside the vehicle and turn on the ignition; then navigate to …

    Frequently Asked Questions

    • Vitara 1988-1998 - Where does the jack of a Suzuki Vitara fit in? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos