Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Filter and Fan on a Suzuki Wagon R

Model: Suzuki Wagon R MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Blower motor

See other generations:
Video tutorial

First, open, empty, and then remove the glove compartment. To do this, simply release the two upper clips one at a time, and then repeat the process with the two lower clips.

Remove the air filter retainer by unscrewing the two side screws, allowing you to also remove the smaller cover. Take it out, then remove the upper cover as shown in the video, releasing the clips with a plastic wedge.

This will give you access to the fan: unscrew the three screws that secure it, disconnect the connector, and take it out. Insert the new fan and reassemble everything.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Replacing Cabin Filter on Suzuki Wagon R - Opel Agila
Replacing Cabin Filter on Suzuki Wagon R - Opel Agila
Suzuki Wagon R (2003-2008 / MK 3) In this video tutorial, you will learn how to remove and replace the cabin air filter on a Suzuki Wagon R, as well as on an Opel Agila. First, locate…
How to Replace the Cabin Filter on a Suzuki Wagon R
How to Replace the Cabin Filter on a Suzuki Wagon R
Suzuki Wagon R (2003-2008 / MK 3) In this video tutorial, you can see how to replace the cabin filter on a Suzuki Wagon R by following a few simple steps: first, purchase a new cabin …
Where are the fuses located in the Suzuki Wagon R?
Suzuki Wagon R (2003-2008 / MK 3) The fuses in the Suzuki Wagon R are contained within specific fuse boxes installed in the vehicle: in this type of car, you can find two boxes for ho…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos