Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Filter in the Suzuki Wagon R?

Model: Suzuki Wagon R MK 6 - Years 2017-2024
Part: Air filter

In this tutorial, you will see how to remove the air filter in the Suzuki Wagon R, an operation to perform if you need to clean or replace it. First, wait for the engine to be completely cold, then open the bonnet and, using a 10 mm socket spanner, undo the bolt located near the oil level dipstick. Once done, unlock the two rear metal clips, disconnect the intake manifold, and lift the engine cover, where the filter is located at the back. After cleaning or replacing it, reassemble everything by following the reverse procedure.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Suzuki Wagon R?
Where are the fuses located in the Suzuki Wagon R?
Suzuki Wagon R (2008-2012 / MK 4, Mh23s) The fuses of the Suzuki Wagon R are all contained within the corresponding fuse boxes that are installed on the vehicle: in this type of vehicle, it …
Diagram and positioning of the fuses of the Suzuki Wagon R
Diagram and positioning of the fuses of the Suzuki Wagon R
Suzuki Wagon R (2003-2008 / MK 3) Today's information will allow us to access the fuse boxes of the Suzuki Wagon R, finding the fuse diagram and chart. First, we open the front door o…
Where are the fuses located in the Suzuki Wagon R?
Suzuki Wagon R (2003-2008 / MK 3) The fuses of the Suzuki Wagon R are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of car it is possible…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos